Skip to content
Florida · 1,106 ZIP codes

GFCI & AFCI Protection in Florida

Ground-fault and arc-fault protection installed where code requires it — kitchens, bathrooms, garages, basements, laundry, outdoors — and repair when devices will not reset.

Serving 344 cities and 53 counties across Florida, on Eastern / Central time.

Typical national range $150 – $500 · Usually scheduled within days

  • 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
  • No obligation: get the number, compare it, and decide on your own schedule.
  • Permits pulled where the job requires one, so the work is inspected and documented for resale.
  • Local crews who know your area’s permit office, inspection timelines and housing stock.
  • Licensed electricians only — ask for the licence number and confirm it before work begins.
1,106FL ZIP codes
344Cities covered
$150Typical low
$500Typical high

GFCI & AFCI in Florida: when to call

  • A GFCI that trips constantly, or will not reset at all
  • Kitchen, bathroom or garage outlets with no GFCI protection
  • An older home with no AFCI protection on bedroom circuits
  • A home inspection or insurance requirement listing missing protection
  • A pool, spa, irrigation or outdoor circuit without GFCI coverage
  • Nuisance trips every time a specific appliance runs

Cost in Florida

The line items below are national 2026 planning ranges for this work. Local variation in Florida comes from labour rates, permit fees and access — not from the job description.

GFCI & AFCI Protection: national 2026 ranges, used here as a benchmark for Florida quotes.
WorkTypical rangeNotes
GFCI receptacle installation$185 – $385Per device, including the device
AFCI breaker installation in panel$200 – $450Requires panel access and testing
Dual-function AFCI/GFCI protection$220 – $500Combined protection in one device
Nuisance trip diagnosis and correction$175 – $425Common with shared-neutral faults
Outdoor, pool or irrigation GFCI protection$250 – $700Weather-rated devices and enclosures

What the work involves

  • Testing of existing protection to find what actually works
  • Receptacle-type GFCI, AFCI or dual-function device installation
  • Breaker-type AFCI or GFCI installation where required
  • Identification and correction of the fault causing nuisance trips
  • Labelling of protected outlets and downstream coverage where relevant

What drives the price in Florida

Most 'bad' GFCI devices are not faulty — moisture, a shared neutral, or a downstream fault is tripping a device that is working exactly as designed.

Code edition determines where protection is required, and adoption varies by state and even by county, so the same house can require different work in two neighbouring jurisdictions.

GFCI & AFCI by city in Florida

Pick the city closest to you for the local page, including every covered ZIP code and the local electrician listing.

Map of Florida coverage for this service

The 14 largest covered cities in Florida for GFCI and AFCI protection.

Sample ZIP codes in Florida

GFCI & AFCI Protection in Florida — FAQ

Which cities in Florida request this most?

The highest volume comes from Miami, Tampa, Jacksonville, Fort Lauderdale, Orlando and the surrounding suburbs, which is where the densest housing stock and the oldest wiring systems tend to be.

Who does GFCI and AFCI protection in Florida?

GFCI and AFCI protection in Florida is performed by licensed electrical contractors working within their own local service areas. The network covers 1,106 ZIP codes here, and requests are routed by address rather than by city name.

What does GFCI and AFCI protection cost in Florida?

The national 2026 range for this work is $150 to $500. Expect Florida pricing to sit somewhere in that band, adjusted for local labour rates, permit fees and how accessible the wiring is. Ask for a flat price per task rather than an hourly estimate.

Can the electrician tell me the price over the phone?

For defined jobs — a charger install, a panel replacement, a ceiling fan on a known ceiling height — a ballpark number is reasonable. For a fault that has not been diagnosed, any honest contractor will explain that the cause determines the price, and will quote the diagnostic first.

What should I do while waiting for an electrician?

For an urgent fault, switch the affected circuit off at the panel and leave it off. If the panel itself is hot, smoking, sparking or wet, do not touch it and keep everyone away from it. Never pull a meter or open a panel, and never pour water on anything electrical.

Is a permit needed for electrical work?

Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.

What warranty should I expect?

Workmanship warranties are set by the contractor, and one to two years on labour is common on larger jobs, with manufacturers covering the equipment separately. Ask for the warranty terms in writing on the invoice, not verbally.

Does GFCI and AFCI protection need a permit in Florida?

Permit requirements depend on the job and on your city or county, not just the state. Work involving a panel, a service change, new circuits or wet locations almost always needs one, and the inspection is carried out locally. Ask the contractor to confirm and to file it.

GFCI & AFCI Protection in Florida — get a price

Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.

Call (619) 877-0478

Open 24 hours a day, 7 days a week. Ask for the licence number and the trip fee before anyone is dispatched.

Coverage: 18,671 US ZIP codes across 47 states. National service list: 20 categories.