San Rafael Electrician — 94913
Looking for electrical work in the 94913 area of San Rafael, California? Licensed electricians covering this ZIP handle repair, replacement and installation work to the code edition Marin County has adopted — and the quote should be in writing before anyone starts.
Ask for a flat price per task rather than an hourly estimate. Flat-rate pricing is the residential standard, and it puts the risk of a slow job on the contractor rather than on your invoice.
Free referral service · no charge for the call · written quote before any work starts
- Licensed electricians only — ask for the licence number and confirm it before work begins.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Every quote itemised — materials, labour, permit fee and anything that could change the scope.
- Repairs tested under load before sign-off, not just switched on and left.
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
Electrical work local to 94913
San Rafael is served by licensed electricians working across 5 ZIP codes. The city page for San Rafael lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in San Rafael call about
- A switch that is hot, buzzing or that trips a breaker
- Outdoor, security or landscape lighting that needs wiring
- Sparks when you plug something in, or a breaker that will not reset
- Lights dim when the fridge, AC or microwave starts
- A breaker trips again within minutes of being reset
- Parking lot, canopy or security lighting that keeps failing
- Old incandescent cans that run hot and burn through bulbs
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Smoke & CO Detector Installation in San Rafael — what it costs
Interconnected smoke and carbon monoxide alarms, hardwired with battery backup, positioned where code requires them and tested after installation.
| Work | Typical range | Notes |
|---|---|---|
| Battery-powered alarm, installed per device | $100 – $200 | Simplest upgrade |
| Hardwired interconnected alarm (per device) | $150 – $350 | Includes wiring to the loop |
| Combination smoke and CO alarm | $175 – $400 | Recommended near fuel appliances |
| Whole-home interconnected system (5-8 alarms) | $500 – $1,500 | Depends on access and wiring |
| Replace expired 10-year sealed alarms | $110 – $250 | Per device, includes disposal |
Duration: typically 1-3 hours. Full Smoke & CO Alarms guide for California.
Services available in 94913
Whole-House Generator Installation
$4,000 – $18,000200 Amp Service Upgrade
$1,800 – $4,500GFCI & AFCI Protection
$150 – $500Outlet, Switch & Receptacle Installation
$120 – $500Whole-House Surge Protection
$300 – $900Solar & Battery Storage Wiring
$1,500 – $12,000Smoke & CO Detector Installation
$100 – $800Ceiling Fan Installation
$150 – $600Electrical Repair & Troubleshooting
$145 – $650What moves the price in San Rafael
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 94913
- County: Marin. Permit and inspection for most electrical work in this area is issued locally.
- Time zone: Pacific — emergency and after-hours availability follows local time.
- 5 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the San Rafael service area
Amber marker: San Rafael, CA 94913. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 94913
Do you have electricians covering the 94913 ZIP code?
Yes — 94913 (San Rafael, California, Marin County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the San Rafael area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
How do I know the electrician is licensed?
Ask for the licence number before work begins and confirm it with the licensing authority for your state or municipality. Electrical licensing is handled at state level in most of the country and at city or county level in a few large metro areas, so the correct place to verify depends on where you live. A licensed contractor will give you the number, and usually the insurance certificate too, without being asked twice.
What does an electrician charge in San Rafael, CA?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in California move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Is 24/7 emergency service available for 94913?
Emergency requests are taken around the clock. Pacific time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
What payment methods are typical?
Card, cheque and bank transfer are common, with financing available on larger projects through some companies. Be cautious of anyone demanding full payment in cash up front — a deposit for materials is normal on large jobs, full prepayment is not.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
Which county handles electrical permits for 94913?
This ZIP sits in Marin County, California. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
Need an electrician in San Rafael 94913?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting San Rafael homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.