Skip to content
80236 · Denver County · Colorado

Denver Electrician — 80236

80236 is the ZIP code for Denver in Denver County, Colorado. Electricians working this route handle everything from a dead outlet in a 1950s bungalow to a 200-amp service upgrade for a new heat pump, and the price of those two jobs is not close.

If the symptom is a burning smell, sparking, smoke or water contacting live wiring, treat it as an emergency and cut the circuit at the panel. Everything else is a scheduling question rather than a safety one.

Free referral service · no charge for the call · written quote before any work starts

  • Written quotes before work starts, with a flat price per task rather than an open hourly meter.
  • Insurance and workers’ compensation verified before anyone arrives at your property.
  • Permits pulled where the job requires one, so the work is inspected and documented for resale.
  • Free phone triage: describe the symptom and find out whether it is urgent or can wait.
  • Local crews who know your area’s permit office, inspection timelines and housing stock.

Electrical work local to 80236

Denver is served by licensed electricians working across 66 ZIP codes and 3 counties. The city page for Denver lists every covered ZIP, and each service page explains what the job involves and what drives the price.

What people in Denver call about

  • Home insurance refuses coverage, or a lender requires an electrical report
  • Double-tapped breakers or circuits with no earth ground
  • You want to schedule charging overnight on a time-of-use rate
  • Water came into contact with outlets, wiring or the service panel
  • A 60-amp or 100-amp service on a modern, fully electrified home
  • Energy retrofit to LED with occupancy controls
  • A freezer, sump pump or medical device that must never lose power

If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.

Dedicated Circuit Installation in Denver — what it costs

Home-run circuits for appliances and equipment that should never share a circuit — freezers, microwaves, dishwashers, dryers, AC units, welders and server racks.

Dedicated Circuit Installation: national 2026 planning ranges. Your quote in Denver, CO will reflect local labour rates, access and permit fees.
WorkTypical rangeNotes
20 amp dedicated circuit, short run$200 – $450Microwave, freezer, dishwasher
20 amp dedicated circuit, long or finished-wall run$350 – $700Fishing and patching add time
30 amp circuit (dryer, small AC, shop tool)$300 – $750Includes 10-gauge conductors
50 amp circuit (range, welder, RV outlet)$400 – $900Includes heavy cable and breaker
GFCI breaker upgrade on a new circuit$60 – $200Required in wet locations

Duration: typically 3-6 hours. Full Dedicated Circuits guide for Colorado.

Services available in 80236

What moves the price in Denver

Things that lower it

  • An existing circuit that can carry the new load
  • Open access — attic, basement or crawlspace runs
  • Bundling several small jobs into one visit
  • Spare breaker positions already in the panel

Things that raise it

  • Fishing new cable through finished plaster or drywall
  • A panel that is full, undersized or a recalled brand
  • Permitted work with inspection and utility coordination
  • Damaged service entrance, meter base or mast

Local notes for 80236

  • Denver County is the permitting jurisdiction for electrical work at this location.
  • Time zone: Mountain — emergency and after-hours availability follows local time.
  • 66 ZIP codes inside this service area.
  • Service radius is local: the crew dispatched is working in this area, not travelling from out of state.

Map of the Denver service area

Amber marker: Denver, CO 80236. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.

Nearby ZIP codes

Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.

Electrician FAQ for 80236

Is a permit needed for electrical work?

Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.

Do you have electricians covering the 80236 ZIP code?

Yes — 80236 (Denver, Colorado, Denver County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Denver area. Give the dispatcher the ZIP and the street so they can confirm the visit window.

How much does an electrician cost per hour?

Licensed residential electricians generally charge in the $50 to $150 per hour range in 2026, plus a service call fee of roughly $75 to $200. Most companies now price common jobs flat-rate rather than hourly, which means the number you are quoted is the number you pay if the scope does not change.

Which county handles electrical permits for 80236?

This ZIP sits in Denver County, Colorado. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.

What does an electrician charge in Denver, CO?

Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Colorado move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.

Do you charge for estimates?

Many contractors give a free estimate on planned work such as a panel replacement, charger install or rewire, while diagnostic visits for an unknown fault usually carry a trip fee that is often credited toward the repair. The exact policy varies by contractor, and it should be confirmed on the phone before anyone travels.

Is 24/7 emergency service available for 80236?

Emergency requests are taken around the clock. Mountain time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.

Need an electrician in Denver 80236?

Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.

Call (619) 877-0478

Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.

Nationwide Electrician is a free referral service connecting Denver homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.