Silver Spring Electrician — 20918
If you are searching for an electrician in the 20918 ZIP code, this page covers the Silver Spring area of Montgomery County, Maryland — what licensed local electricians handle here, what the work typically costs, and how to get a written quote without a sales visit.
Most Silver Spring jobs fall into three buckets: a repair to something that has failed, an upgrade because the house now draws more power than it did, or a new install — an EV charger, a generator, a hot tub, a dedicated circuit.
Free referral service · no charge for the call · written quote before any work starts
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Insurance and workers’ compensation verified before anyone arrives at your property.
- Licensed electricians only — ask for the licence number and confirm it before work begins.
- Every quote itemised — materials, labour, permit fee and anything that could change the scope.
- Repairs tested under load before sign-off, not just switched on and left.
Electrical work local to 20918
Silver Spring is served by licensed electricians working across 16 ZIP codes. The city page for Silver Spring lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Silver Spring call about
- Applying for an EV charger, heat pump or tankless water heater
- Every repair uncovers a new problem because the wire itself is the problem
- Parking lot, canopy or security lighting that keeps failing
- Adding an ADU, garage conversion, addition or finished basement
- Home insurance refuses coverage, or a lender requires an electrical report
- Flickering lights on circuits that also carry heavier loads
- Sparks when you plug something in, or a breaker that will not reset
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Smoke & CO Detector Installation in Silver Spring — what it costs
Interconnected smoke and carbon monoxide alarms, hardwired with battery backup, positioned where code requires them and tested after installation.
| Work | Typical range | Notes |
|---|---|---|
| Battery-powered alarm, installed per device | $100 – $200 | Simplest upgrade |
| Hardwired interconnected alarm (per device) | $150 – $350 | Includes wiring to the loop |
| Combination smoke and CO alarm | $175 – $400 | Recommended near fuel appliances |
| Whole-home interconnected system (5-8 alarms) | $500 – $1,500 | Depends on access and wiring |
| Replace expired 10-year sealed alarms | $110 – $250 | Per device, includes disposal |
Duration: typically 1-3 hours. Full Smoke & CO Alarms guide for Maryland.
Services available in 20918
Whole-House Surge Protection
$300 – $900Smoke & CO Detector Installation
$100 – $800200 Amp Service Upgrade
$1,800 – $4,500Electrical Safety Inspection
$250 – $90024/7 Emergency Electrician
$150 – $850GFCI & AFCI Protection
$150 – $500Dedicated Circuit Installation
$200 – $900Ceiling Fan Installation
$150 – $600Electrical Repair & Troubleshooting
$145 – $650What moves the price in Silver Spring
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 20918
- Located in Montgomery — the authority that issues electrical permits for this address.
- Time zone: Eastern — emergency and after-hours availability follows local time.
- 16 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Silver Spring service area
Amber marker: Silver Spring, MD 20918. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 20918
Which county handles electrical permits for 20918?
This ZIP sits in Montgomery County, Maryland. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
What does an electrician charge in Silver Spring, MD?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Maryland move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
Is 24/7 emergency service available for 20918?
Emergency requests are taken around the clock. Eastern time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Do you have electricians covering the 20918 ZIP code?
Yes — 20918 (Silver Spring, Maryland, Montgomery County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Silver Spring area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
How much does an electrician cost per hour?
Licensed residential electricians generally charge in the $50 to $150 per hour range in 2026, plus a service call fee of roughly $75 to $200. Most companies now price common jobs flat-rate rather than hourly, which means the number you are quoted is the number you pay if the scope does not change.
How do I know the electrician is licensed?
Ask for the licence number before work begins and confirm it with the licensing authority for your state or municipality. Electrical licensing is handled at state level in most of the country and at city or county level in a few large metro areas, so the correct place to verify depends on where you live. A licensed contractor will give you the number, and usually the insurance certificate too, without being asked twice.
Need an electrician in Silver Spring 20918?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Silver Spring homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.