Saint George Electrician — 84790
If you are searching for an electrician in the 84790 ZIP code, this page covers the Saint George area of Washington County, Utah — what licensed local electricians handle here, what the work typically costs, and how to get a written quote without a sales visit.
Most Saint George jobs fall into three buckets: a repair to something that has failed, an upgrade because the house now draws more power than it did, or a new install — an EV charger, a generator, a hot tub, a dedicated circuit.
Free referral service · no charge for the call · written quote before any work starts
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
- Free phone triage: describe the symptom and find out whether it is urgent or can wait.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Repairs tested under load before sign-off, not just switched on and left.
- Local crews who know your area’s permit office, inspection timelines and housing stock.
Electrical work local to 84790
Saint George is served by licensed electricians working across 2 ZIP codes. The city page for Saint George lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Saint George call about
- Adding solar and needing the electrical panel prepared for interconnection
- Too few outlets, so extension cords run across rooms
- You want to schedule charging overnight on a time-of-use rate
- Two-prong outlets throughout, or three-prong outlets with no ground path
- Frequent outages and a desire for seamless switchover
- Outdoor, security or landscape lighting that needs wiring
- Adding a fan to a bedroom, porch or vaulted ceiling room
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Circuit Breaker Replacement & Repair in Saint George — what it costs
Replacement of worn, tripping, buzzing or obsolete breakers, plus diagnosis of the circuit fault when the breaker is doing its job and something else is wrong.
| Work | Typical range | Notes |
|---|---|---|
| Circuit breaker replacement (standard single) | $150 – $350 | Includes a matched replacement breaker |
| Double-pole or 240V breaker replacement | $200 – $450 | Dryer, range, AC circuits |
| GFCI / AFCI breaker replacement | $200 – $500 | Costlier device, more testing |
| Circuit fault tracing behind repeated trips | $200 – $600 | Often the real problem |
| Obsolete-panel breaker sourcing | $250 – $600 | When available at all |
Duration: typically 1-3 hours. Full Breaker Repair guide for Utah.
Services available in 84790
Electrical Repair & Troubleshooting
$145 – $650EV Charger Installation
$500 – $3,500Recessed & LED Lighting Installation
$150 – $900Whole-House Surge Protection
$300 – $900Dedicated Circuit Installation
$200 – $900Outlet, Switch & Receptacle Installation
$120 – $500Solar & Battery Storage Wiring
$1,500 – $12,000GFCI & AFCI Protection
$150 – $500Whole-House Generator Installation
$4,000 – $18,000What moves the price in Saint George
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 84790
- County: Washington. Permit and inspection for most electrical work in this area is issued locally.
- Time zone: Mountain — emergency and after-hours availability follows local time.
- 2 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Saint George service area
Amber marker: Saint George, UT 84790. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 84790
Do you have electricians covering the 84790 ZIP code?
Yes — 84790 (Saint George, Utah, Washington County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Saint George area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
What does an electrician charge in Saint George, UT?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Utah move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Is 24/7 emergency service available for 84790?
Emergency requests are taken around the clock. Mountain time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Which county handles electrical permits for 84790?
This ZIP sits in Washington County, Utah. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
How quickly can someone get here?
Timing depends on the local contractor schedule and the nature of the call. Genuine emergencies are usually prioritised, often with same-day or overnight response, while planned work is typically scheduled within days rather than hours.
What should I do while waiting for an electrician?
For an urgent fault, switch the affected circuit off at the panel and leave it off. If the panel itself is hot, smoking, sparking or wet, do not touch it and keep everyone away from it. Never pull a meter or open a panel, and never pour water on anything electrical.
Need an electrician in Saint George 84790?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Saint George homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.