Salt Lake City Electrician — 84152
Looking for electrical work in the 84152 area of Salt Lake City, Utah? Licensed electricians covering this ZIP handle repair, replacement and installation work to the code edition Salt Lake County has adopted — and the quote should be in writing before anyone starts.
Ask for a flat price per task rather than an hourly estimate. Flat-rate pricing is the residential standard, and it puts the risk of a slow job on the contractor rather than on your invoice.
Free referral service · no charge for the call · written quote before any work starts
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
- Local crews who know your area’s permit office, inspection timelines and housing stock.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- No obligation: get the number, compare it, and decide on your own schedule.
- Licensed electricians only — ask for the licence number and confirm it before work begins.
Electrical work local to 84152
Salt Lake City is served by licensed electricians working across 50 ZIP codes. The city page for Salt Lake City lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Salt Lake City call about
- A burning or fishy smell near an outlet, switch or panel
- Repeated trips that began after adding a new appliance
- Breakers of a brand no longer manufactured, so no replacement is available
- A breaker handle feels loose, will not stay in the on position, or is hot
- Energy retrofit to LED with occupancy controls
- A home built between about 1965 and 1973 with branch circuit aluminium
- Electronics, garage door openers or HVAC boards failing repeatedly
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Recessed & LED Lighting Installation in Salt Lake City — what it costs
Recessed cans, wafer LEDs, under-cabinet strips, landscape and security lighting laid out for usable light rather than a grid of glare.
| Work | Typical range | Notes |
|---|---|---|
| Recessed LED fixture install (per light, open access) | $125 – $300 | Attic access, existing circuit |
| Recessed fixture install, finished ceiling | $175 – $400 | Cutting, fishing and patching |
| Under-cabinet LED strip lighting | $350 – $900 | Run length and switching drive cost |
| New dimmer and switch leg | $150 – $400 | Per control location |
| Outdoor, security or landscape lighting run | $400 – $1,500 | Trenching and transformers excluded |
Duration: typically 3 hours - 2 days. Full Lighting Install guide for Utah.
Services available in 84152
Outlet, Switch & Receptacle Installation
$120 – $500200 Amp Service Upgrade
$1,800 – $4,500Electrical Repair & Troubleshooting
$145 – $650Dedicated Circuit Installation
$200 – $900GFCI & AFCI Protection
$150 – $500Hot Tub & Spa Wiring
$400 – $2,000Whole-House Surge Protection
$300 – $900Recessed & LED Lighting Installation
$150 – $900Whole-House Generator Installation
$4,000 – $18,000What moves the price in Salt Lake City
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 84152
- Located in Salt Lake — the authority that issues electrical permits for this address.
- Time zone: Mountain — emergency and after-hours availability follows local time.
- 50 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Salt Lake City service area
Amber marker: Salt Lake City, UT 84152. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 84152
Which county handles electrical permits for 84152?
This ZIP sits in Salt Lake County, Utah. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
What does an electrician charge in Salt Lake City, UT?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Utah move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Do you have electricians covering the 84152 ZIP code?
Yes — 84152 (Salt Lake City, Utah, Salt Lake County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Salt Lake City area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Is 24/7 emergency service available for 84152?
Emergency requests are taken around the clock. Mountain time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
What warranty should I expect?
Workmanship warranties are set by the contractor, and one to two years on labour is common on larger jobs, with manufacturers covering the equipment separately. Ask for the warranty terms in writing on the invoice, not verbally.
What should I do while waiting for an electrician?
For an urgent fault, switch the affected circuit off at the panel and leave it off. If the panel itself is hot, smoking, sparking or wet, do not touch it and keep everyone away from it. Never pull a meter or open a panel, and never pour water on anything electrical.
Other ZIP codes in Salt Lake City, UT
50 covered ZIP codes in Salt Lake City. Jump straight to the one closest to your address.
Need an electrician in Salt Lake City 84152?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Salt Lake City homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.