San Francisco Electrician — 94119
Homeowners in San Francisco (94119) deal with the same electrical reality as the rest of City and County of San Francisco County: older wiring under modern loads. This page explains what is worth fixing, what it costs in California, and who to call for a licensed opinion.
Price in California tracks the same three variables as anywhere: how hard it is to reach the wiring, whether the panel has capacity to spare, and whether the job needs a permit and inspection.
Free referral service · no charge for the call · written quote before any work starts
- Licensed electricians only — ask for the licence number and confirm it before work begins.
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Every quote itemised — materials, labour, permit fee and anything that could change the scope.
- Written quotes before work starts, with a flat price per task rather than an open hourly meter.
Electrical work local to 94119
San Francisco is served by licensed electricians working across 51 ZIP codes and 2 counties. The city page for San Francisco lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in San Francisco call about
- Breakers of a brand no longer manufactured, so no replacement is available
- Energy retrofit to LED with occupancy controls
- Before a major renovation, solar, battery or EV decision
- A utility requiring an interconnection application and inspection
- The cover cannot go back on because there is no space left
- Insurance or a warranty claim that asked for surge protection
- A burning or fishy smell near an outlet, switch or panel
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Whole-House Generator Installation in San Francisco — what it costs
Standby and portable generators wired safely — correct sizing, automatic transfer switch, load management and permitted installation.
| Work | Typical range | Notes |
|---|---|---|
| Manual transfer switch and inlet box | $800 – $2,500 | For a portable generator |
| Automatic transfer switch installation | $1,800 – $4,500 | Electrical side of a standby system |
| Standby generator electrical install (22-26 kW) | $4,000 – $9,000 | Typically the most requested size |
| Larger standby system (30-48 kW or whole-house) | $7,000 – $18,000 | Large homes, heavy electric load |
| Generator sub-panel and load management | $900 – $3,000 | Keeps the home inside a smaller generator |
Duration: typically 1-3 days. Full Generator Install guide for California.
Services available in 94119
Recessed & LED Lighting Installation
$150 – $900GFCI & AFCI Protection
$150 – $500Electrical Repair & Troubleshooting
$145 – $650Dedicated Circuit Installation
$200 – $900200 Amp Service Upgrade
$1,800 – $4,500Hot Tub & Spa Wiring
$400 – $2,000EV Charger Installation
$500 – $3,500Aluminum Wiring Repair
$300 – $9,000Ceiling Fan Installation
$150 – $600What moves the price in San Francisco
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 94119
- County: City and County of San Francisco. Permit and inspection for most electrical work in this area is issued locally.
- Time zone: Pacific — emergency and after-hours availability follows local time.
- 51 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the San Francisco service area
Amber marker: San Francisco, CA 94119. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 94119
Do you have electricians covering the 94119 ZIP code?
Yes — 94119 (San Francisco, California, City and County of San Francisco County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the San Francisco area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
How do I know the electrician is licensed?
Ask for the licence number before work begins and confirm it with the licensing authority for your state or municipality. Electrical licensing is handled at state level in most of the country and at city or county level in a few large metro areas, so the correct place to verify depends on where you live. A licensed contractor will give you the number, and usually the insurance certificate too, without being asked twice.
Is 24/7 emergency service available for 94119?
Emergency requests are taken around the clock. Pacific time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
What does an electrician charge in San Francisco, CA?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in California move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Which county handles electrical permits for 94119?
This ZIP sits in City and County of San Francisco County, California. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
What should I do while waiting for an electrician?
For an urgent fault, switch the affected circuit off at the panel and leave it off. If the panel itself is hot, smoking, sparking or wet, do not touch it and keep everyone away from it. Never pull a meter or open a panel, and never pour water on anything electrical.
Other ZIP codes in San Francisco, CA
51 covered ZIP codes in San Francisco. Jump straight to the one closest to your address.
Need an electrician in San Francisco 94119?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting San Francisco homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.