San Francisco Electrician — 94172
Electrical work in 94172 (San Francisco, California) is licensed, permitted and inspected work. This page is a plain-language guide to the jobs local electricians run in this area, with 2026 price ranges you can compare a quote against.
A licensed electrician serving San Francisco should be able to confirm their licence and insurance before arriving, and should tell you the trip fee on the phone. Anything less is a reason to keep calling.
Free referral service · no charge for the call · written quote before any work starts
- No obligation: get the number, compare it, and decide on your own schedule.
- Every quote itemised — materials, labour, permit fee and anything that could change the scope.
- Insurance and workers’ compensation verified before anyone arrives at your property.
- Free phone triage: describe the symptom and find out whether it is urgent or can wait.
- Local crews who know your area’s permit office, inspection timelines and housing stock.
Electrical work local to 94172
San Francisco is served by licensed electricians working across 51 ZIP codes and 2 counties. The city page for San Francisco lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in San Francisco call about
- An insurer asking for documentation before renewing a policy
- Adding solar and needing the electrical panel prepared for interconnection
- Repeated outages that threaten food, heat, sump pumps or medical equipment
- Buzzing from inside the panel with the cover on
- Tripping GFCI whenever the heater or jets kick in
- Modern appliances with sensitive control boards everywhere
- Half the house lost power but the main breaker is still on
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Whole-House Surge Protection in San Francisco — what it costs
Panel-mounted surge protective devices plus point-of-use protection for the electronics, pumps and appliances that surge strips never reach.
| Work | Typical range | Notes |
|---|---|---|
| Whole-house surge protective device (Type 2) | $300 – $700 | Panel-mounted with dedicated breaker |
| Premium SPD with higher surge rating | $450 – $900 | For lightning-prone areas |
| Grounding and bonding repair before SPD install | $250 – $800 | Often required for warranty coverage |
| Sub-panel surge protection | $350 – $750 | Detached garage, shop, pool equipment |
| Point-of-use protection review | $100 – $300 | Often bundled with the panel device |
Duration: typically 1-3 hours. Full Surge Protection guide for California.
Services available in 94172
Hot Tub & Spa Wiring
$400 – $2,000Smoke & CO Detector Installation
$100 – $800Circuit Breaker Replacement & Repair
$150 – $600Outlet, Switch & Receptacle Installation
$120 – $500Electrical Panel Replacement
$1,300 – $4,000GFCI & AFCI Protection
$150 – $500Commercial Electrical Services
$300 – $15,000Ceiling Fan Installation
$150 – $600Whole-House Generator Installation
$4,000 – $18,000What moves the price in San Francisco
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 94172
- Located in City and County of San Francisco — the authority that issues electrical permits for this address.
- Time zone: Pacific — emergency and after-hours availability follows local time.
- 51 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the San Francisco service area
Amber marker: San Francisco, CA 94172. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 94172
How much does an electrician cost per hour?
Licensed residential electricians generally charge in the $50 to $150 per hour range in 2026, plus a service call fee of roughly $75 to $200. Most companies now price common jobs flat-rate rather than hourly, which means the number you are quoted is the number you pay if the scope does not change.
Is 24/7 emergency service available for 94172?
Emergency requests are taken around the clock. Pacific time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
What payment methods are typical?
Card, cheque and bank transfer are common, with financing available on larger projects through some companies. Be cautious of anyone demanding full payment in cash up front — a deposit for materials is normal on large jobs, full prepayment is not.
Do you have electricians covering the 94172 ZIP code?
Yes — 94172 (San Francisco, California, City and County of San Francisco County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the San Francisco area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Which county handles electrical permits for 94172?
This ZIP sits in City and County of San Francisco County, California. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
Can the electrician tell me the price over the phone?
For defined jobs — a charger install, a panel replacement, a ceiling fan on a known ceiling height — a ballpark number is reasonable. For a fault that has not been diagnosed, any honest contractor will explain that the cause determines the price, and will quote the diagnostic first.
What does an electrician charge in San Francisco, CA?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in California move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Other ZIP codes in San Francisco, CA
51 covered ZIP codes in San Francisco. Jump straight to the one closest to your address.
Need an electrician in San Francisco 94172?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting San Francisco homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.