Skip to content
45419 · Montgomery County · Ohio

Dayton Electrician — 45419

The 45419 ZIP code covers part of Dayton in Montgomery County. That matters for electrical work, because permits and inspections for panel changes, new circuits and service upgrades are issued locally rather than nationally.

Permits for most electrical work in Ohio are issued by a city or county building department, so the same job two towns over can involve a different fee and inspection timeline.

Free referral service · no charge for the call · written quote before any work starts

  • Local crews who know your area’s permit office, inspection timelines and housing stock.
  • Insurance and workers’ compensation verified before anyone arrives at your property.
  • 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
  • No obligation: get the number, compare it, and decide on your own schedule.
  • Permits pulled where the job requires one, so the work is inspected and documented for resale.

Electrical work local to 45419

Dayton is served by licensed electricians working across 43 ZIP codes and 2 counties. The city page for Dayton lists every covered ZIP, and each service page explains what the job involves and what drives the price.

What people in Dayton call about

  • Alarms that are not interconnected, so a basement fire does not wake the bedrooms
  • Double-tapped breakers or circuits with no earth ground
  • Outdoor, security or landscape lighting that needs wiring
  • Aluminium branch circuit conductors on 15 and 20 amp circuits
  • An outdoor or damp-rated location needing the right fixture
  • Every repair uncovers a new problem because the wire itself is the problem
  • Knob-and-tube, cloth-wrapped or fabric-insulated wiring is visible

If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.

Aluminum Wiring Repair in Dayton — what it costs

Assessment and remediation of aluminium branch circuit wiring in homes built roughly between 1965 and 1973, where loose connections create real fire risk.

Aluminum Wiring Repair: national 2026 planning ranges. Your quote in Dayton, OH will reflect local labour rates, access and permit fees.
WorkTypical rangeNotes
Full aluminium wiring inspection and report$300 – $900Room-by-room device check
Copper pigtailing at outlets and switches$40 – $120Per device, typical remediation method
Whole-home pigtailing remediation$2,000 – $6,000Depends on device count
Partial circuit replacement$1,500 – $5,000Kitchen, bath, laundry first
Full branch circuit replacement$4,000 – $9,000Highest-confidence fix

Duration: typically 1 day - 2 weeks. Full Aluminum Wiring guide for Ohio.

Services available in 45419

What moves the price in Dayton

Things that lower it

  • An existing circuit that can carry the new load
  • Open access — attic, basement or crawlspace runs
  • Bundling several small jobs into one visit
  • Spare breaker positions already in the panel

Things that raise it

  • Fishing new cable through finished plaster or drywall
  • A panel that is full, undersized or a recalled brand
  • Permitted work with inspection and utility coordination
  • Damaged service entrance, meter base or mast

Local notes for 45419

  • County: Montgomery. Permit and inspection for most electrical work in this area is issued locally.
  • Time zone: Eastern — emergency and after-hours availability follows local time.
  • 43 ZIP codes inside this service area.
  • Service radius is local: the crew dispatched is working in this area, not travelling from out of state.

Map of the Dayton service area

Amber marker: Dayton, OH 45419. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.

Nearby ZIP codes

Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.

Electrician FAQ for 45419

Is 24/7 emergency service available for 45419?

Emergency requests are taken around the clock. Eastern time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.

How much does an electrician cost per hour?

Licensed residential electricians generally charge in the $50 to $150 per hour range in 2026, plus a service call fee of roughly $75 to $200. Most companies now price common jobs flat-rate rather than hourly, which means the number you are quoted is the number you pay if the scope does not change.

What does an electrician charge in Dayton, OH?

Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Ohio move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.

What should I do while waiting for an electrician?

For an urgent fault, switch the affected circuit off at the panel and leave it off. If the panel itself is hot, smoking, sparking or wet, do not touch it and keep everyone away from it. Never pull a meter or open a panel, and never pour water on anything electrical.

Do you have electricians covering the 45419 ZIP code?

Yes — 45419 (Dayton, Ohio, Montgomery County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Dayton area. Give the dispatcher the ZIP and the street so they can confirm the visit window.

What warranty should I expect?

Workmanship warranties are set by the contractor, and one to two years on labour is common on larger jobs, with manufacturers covering the equipment separately. Ask for the warranty terms in writing on the invoice, not verbally.

Which county handles electrical permits for 45419?

This ZIP sits in Montgomery County, Ohio. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.

Need an electrician in Dayton 45419?

Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.

Call (619) 877-0478

Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.

Nationwide Electrician is a free referral service connecting Dayton homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.