Skip to content
75358 · Dallas County · Texas

Dallas Electrician — 75358

If you are searching for an electrician in the 75358 ZIP code, this page covers the Dallas area of Dallas County, Texas — what licensed local electricians handle here, what the work typically costs, and how to get a written quote without a sales visit.

Most Dallas jobs fall into three buckets: a repair to something that has failed, an upgrade because the house now draws more power than it did, or a new install — an EV charger, a generator, a hot tub, a dedicated circuit.

Free referral service · no charge for the call · written quote before any work starts

  • Permits pulled where the job requires one, so the work is inspected and documented for resale.
  • 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
  • Repairs tested under load before sign-off, not just switched on and left.
  • Free phone triage: describe the symptom and find out whether it is urgent or can wait.
  • No obligation: get the number, compare it, and decide on your own schedule.

Electrical work local to 75358

Dallas is served by licensed electricians working across 105 ZIP codes. The city page for Dallas lists every covered ZIP, and each service page explains what the job involves and what drives the price.

What people in Dallas call about

  • Buzzing, crackling or sizzling sounds from the panel
  • A homeowner-installed tub circuit with no permit on record
  • Breakers that feel hot, trip without load or will not reset cleanly
  • A breaker trips whenever the microwave and toaster run together
  • Water came into contact with outlets, wiring or the service panel
  • Applying for an EV charger, heat pump or tankless water heater
  • Warm or discoloured outlet and switch faceplates

If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.

Whole-House Rewiring in Dallas — what it costs

Replacement of obsolete or unsafe wiring throughout a home — knob-and-tube, cloth-insulated, two-wire ungrounded or failing aluminium branch circuits.

Whole-House Rewiring: national 2026 planning ranges. Your quote in Dallas, TX will reflect local labour rates, access and permit fees.
WorkTypical rangeNotes
Whole-home rewire, open access (attic/basement bays)$8,000 – $16,000Roughly $4-$7 per sq ft in easy-access homes
Whole-home rewire, fully finished with plaster$14,000 – $30,000Up to $15 per sq ft in dense markets
Partial rewire (circuit groups / one floor)$2,500 – $9,000Often the first phase
Knob-and-tube removal and replacement$3,000 – $12,000Depends on how much remains
Aluminium branch circuit remediation$2,000 – $8,000Pigtailing copper at each device, or full replacement

Duration: typically 1-3 weeks. Full Whole-House Rewiring guide for Texas.

Services available in 75358

What moves the price in Dallas

Things that lower it

  • An existing circuit that can carry the new load
  • Open access — attic, basement or crawlspace runs
  • Bundling several small jobs into one visit
  • Spare breaker positions already in the panel

Things that raise it

  • Fishing new cable through finished plaster or drywall
  • A panel that is full, undersized or a recalled brand
  • Permitted work with inspection and utility coordination
  • Damaged service entrance, meter base or mast

Local notes for 75358

  • Located in Dallas — the authority that issues electrical permits for this address.
  • Time zone: Central — emergency and after-hours availability follows local time.
  • 105 ZIP codes inside this service area.
  • Service radius is local: the crew dispatched is working in this area, not travelling from out of state.

Map of the Dallas service area

Amber marker: Dallas, TX 75358. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.

Nearby ZIP codes

Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.

Electrician FAQ for 75358

Do you have electricians covering the 75358 ZIP code?

Yes — 75358 (Dallas, Texas, Dallas County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Dallas area. Give the dispatcher the ZIP and the street so they can confirm the visit window.

Is a permit needed for electrical work?

Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.

What should I do while waiting for an electrician?

For an urgent fault, switch the affected circuit off at the panel and leave it off. If the panel itself is hot, smoking, sparking or wet, do not touch it and keep everyone away from it. Never pull a meter or open a panel, and never pour water on anything electrical.

Is 24/7 emergency service available for 75358?

Emergency requests are taken around the clock. Central time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.

Which county handles electrical permits for 75358?

This ZIP sits in Dallas County, Texas. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.

Do you handle both homes and small businesses?

Most local electrical contractors take residential work and light commercial work such as retail, restaurant and office premises, including three-phase distribution, lighting retrofits and dedicated equipment circuits. Larger commercial projects are quoted from a site survey.

What does an electrician charge in Dallas, TX?

Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Texas move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.

Need an electrician in Dallas 75358?

Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.

Call (619) 877-0478

Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.

Nationwide Electrician is a free referral service connecting Dallas homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.