Fort Worth Electrician — 76104
Looking for electrical work in the 76104 area of Fort Worth, Texas? Licensed electricians covering this ZIP handle repair, replacement and installation work to the code edition Tarrant County has adopted — and the quote should be in writing before anyone starts.
Ask for a flat price per task rather than an hourly estimate. Flat-rate pricing is the residential standard, and it puts the risk of a slow job on the contractor rather than on your invoice.
Free referral service · no charge for the call · written quote before any work starts
- Licensed electricians only — ask for the licence number and confirm it before work begins.
- Local crews who know your area’s permit office, inspection timelines and housing stock.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Repairs tested under load before sign-off, not just switched on and left.
- Free phone triage: describe the symptom and find out whether it is urgent or can wait.
Electrical work local to 76104
Fort Worth is served by licensed electricians working across 56 ZIP codes. The city page for Fort Worth lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Fort Worth call about
- Too few outlets, so extension cords run across rooms
- Flickering lights on circuits that also carry heavier loads
- A breaker handle feels loose, will not stay in the on position, or is hot
- An insurer asking for documentation before renewing a policy
- Buzzing, crackling or sizzling sounds from the panel
- Faceplates or dimmer switches feel warm to the touch
- Old incandescent cans that run hot and burn through bulbs
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Recessed & LED Lighting Installation in Fort Worth — what it costs
Recessed cans, wafer LEDs, under-cabinet strips, landscape and security lighting laid out for usable light rather than a grid of glare.
| Work | Typical range | Notes |
|---|---|---|
| Recessed LED fixture install (per light, open access) | $125 – $300 | Attic access, existing circuit |
| Recessed fixture install, finished ceiling | $175 – $400 | Cutting, fishing and patching |
| Under-cabinet LED strip lighting | $350 – $900 | Run length and switching drive cost |
| New dimmer and switch leg | $150 – $400 | Per control location |
| Outdoor, security or landscape lighting run | $400 – $1,500 | Trenching and transformers excluded |
Duration: typically 3 hours - 2 days. Full Lighting Install guide for Texas.
Services available in 76104
Smoke & CO Detector Installation
$100 – $800200 Amp Service Upgrade
$1,800 – $4,500Electrical Repair & Troubleshooting
$145 – $65024/7 Emergency Electrician
$150 – $850Whole-House Surge Protection
$300 – $900Dedicated Circuit Installation
$200 – $900Hot Tub & Spa Wiring
$400 – $2,000Solar & Battery Storage Wiring
$1,500 – $12,000Whole-House Generator Installation
$4,000 – $18,000What moves the price in Fort Worth
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 76104
- County: Tarrant. Permit and inspection for most electrical work in this area is issued locally.
- Time zone: Central — emergency and after-hours availability follows local time.
- 56 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Fort Worth service area
Amber marker: Fort Worth, TX 76104. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 76104
Do you have electricians covering the 76104 ZIP code?
Yes — 76104 (Fort Worth, Texas, Tarrant County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Fort Worth area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Which county handles electrical permits for 76104?
This ZIP sits in Tarrant County, Texas. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
What does an electrician charge in Fort Worth, TX?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Texas move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
How do I know the electrician is licensed?
Ask for the licence number before work begins and confirm it with the licensing authority for your state or municipality. Electrical licensing is handled at state level in most of the country and at city or county level in a few large metro areas, so the correct place to verify depends on where you live. A licensed contractor will give you the number, and usually the insurance certificate too, without being asked twice.
What warranty should I expect?
Workmanship warranties are set by the contractor, and one to two years on labour is common on larger jobs, with manufacturers covering the equipment separately. Ask for the warranty terms in writing on the invoice, not verbally.
Is 24/7 emergency service available for 76104?
Emergency requests are taken around the clock. Central time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Other ZIP codes in Fort Worth, TX
56 covered ZIP codes in Fort Worth. Jump straight to the one closest to your address.
Need an electrician in Fort Worth 76104?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Fort Worth homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.