Fort Worth Electrician — 76119
Homeowners in Fort Worth (76119) deal with the same electrical reality as the rest of Tarrant County: older wiring under modern loads. This page explains what is worth fixing, what it costs in Texas, and who to call for a licensed opinion.
Price in Texas tracks the same three variables as anywhere: how hard it is to reach the wiring, whether the panel has capacity to spare, and whether the job needs a permit and inspection.
Free referral service · no charge for the call · written quote before any work starts
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Repairs tested under load before sign-off, not just switched on and left.
- Licensed electricians only — ask for the licence number and confirm it before work begins.
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
- Free phone triage: describe the symptom and find out whether it is urgent or can wait.
Electrical work local to 76119
Fort Worth is served by licensed electricians working across 56 ZIP codes. The city page for Fort Worth lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Fort Worth call about
- A fuse box instead of breakers, or a 60-amp or 100-amp service
- Kitchen or laundry appliances sharing a general-purpose circuit
- Insurance or a warranty claim that asked for surge protection
- Lights dim when the fridge, AC or microwave starts
- Parking lot, canopy or security lighting that keeps failing
- Someone in the home depends on powered medical equipment
- Insurance or a home inspector flagged insufficient service capacity
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Outlet, Switch & Receptacle Installation in Fort Worth — what it costs
New outlets, USB and smart switches, dimmers and three-way replacements — installed on existing circuits or on a new dedicated circuit when the load needs one.
| Work | Typical range | Notes |
|---|---|---|
| Replace an existing outlet or switch | $120 – $300 | Simple swap, same location |
| Install a new outlet on an existing circuit | $180 – $450 | Short run, accessible wall |
| GFCI or AFCI receptacle install | $185 – $385 | Required near water and in many remodels |
| Smart switch, dimmer or three-way replacement | $150 – $400 | Per device, includes compatibility check |
| USB-C receptacle or combination device | $165 – $380 | Device cost included |
Duration: typically 1-3 hours. Full Outlets & Switches guide for Texas.
Services available in 76119
Electrical Repair & Troubleshooting
$145 – $65024/7 Emergency Electrician
$150 – $850Ceiling Fan Installation
$150 – $600Whole-House Rewiring
$8,000 – $30,000Whole-House Surge Protection
$300 – $900GFCI & AFCI Protection
$150 – $500Recessed & LED Lighting Installation
$150 – $900Electrical Safety Inspection
$250 – $900Dedicated Circuit Installation
$200 – $900What moves the price in Fort Worth
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 76119
- Located in Tarrant — the authority that issues electrical permits for this address.
- Time zone: Central — emergency and after-hours availability follows local time.
- 56 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Fort Worth service area
Amber marker: Fort Worth, TX 76119. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 76119
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
How do I know the electrician is licensed?
Ask for the licence number before work begins and confirm it with the licensing authority for your state or municipality. Electrical licensing is handled at state level in most of the country and at city or county level in a few large metro areas, so the correct place to verify depends on where you live. A licensed contractor will give you the number, and usually the insurance certificate too, without being asked twice.
Which county handles electrical permits for 76119?
This ZIP sits in Tarrant County, Texas. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
Do you handle both homes and small businesses?
Most local electrical contractors take residential work and light commercial work such as retail, restaurant and office premises, including three-phase distribution, lighting retrofits and dedicated equipment circuits. Larger commercial projects are quoted from a site survey.
Do you have electricians covering the 76119 ZIP code?
Yes — 76119 (Fort Worth, Texas, Tarrant County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Fort Worth area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
What does an electrician charge in Fort Worth, TX?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Texas move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Is 24/7 emergency service available for 76119?
Emergency requests are taken around the clock. Central time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Other ZIP codes in Fort Worth, TX
56 covered ZIP codes in Fort Worth. Jump straight to the one closest to your address.
Need an electrician in Fort Worth 76119?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Fort Worth homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.