Seattle Electrician — 98113
If you are searching for an electrician in the 98113 ZIP code, this page covers the Seattle area of King County, Washington — what licensed local electricians handle here, what the work typically costs, and how to get a written quote without a sales visit.
Most Seattle jobs fall into three buckets: a repair to something that has failed, an upgrade because the house now draws more power than it did, or a new install — an EV charger, a generator, a hot tub, a dedicated circuit.
Free referral service · no charge for the call · written quote before any work starts
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Insurance and workers’ compensation verified before anyone arrives at your property.
- Licensed electricians only — ask for the licence number and confirm it before work begins.
- Free phone triage: describe the symptom and find out whether it is urgent or can wait.
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
Electrical work local to 98113
Seattle is served by licensed electricians working across 59 ZIP codes. The city page for Seattle lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Seattle call about
- Lights dim when the fridge, AC or microwave starts
- A panel, sub-panel or three-phase distribution upgrade
- A home office, well pump or sump pump that cannot stop
- A breaker trips whenever the microwave and toaster run together
- Too few outlets, so extension cords run across rooms
- Kitchen, bathroom or garage outlets with no GFCI protection
- A home inspection or insurance requirement listing missing protection
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Whole-House Rewiring in Seattle — what it costs
Replacement of obsolete or unsafe wiring throughout a home — knob-and-tube, cloth-insulated, two-wire ungrounded or failing aluminium branch circuits.
| Work | Typical range | Notes |
|---|---|---|
| Whole-home rewire, open access (attic/basement bays) | $8,000 – $16,000 | Roughly $4-$7 per sq ft in easy-access homes |
| Whole-home rewire, fully finished with plaster | $14,000 – $30,000 | Up to $15 per sq ft in dense markets |
| Partial rewire (circuit groups / one floor) | $2,500 – $9,000 | Often the first phase |
| Knob-and-tube removal and replacement | $3,000 – $12,000 | Depends on how much remains |
| Aluminium branch circuit remediation | $2,000 – $8,000 | Pigtailing copper at each device, or full replacement |
Duration: typically 1-3 weeks. Full Whole-House Rewiring guide for Washington.
Services available in 98113
Whole-House Surge Protection
$300 – $900200 Amp Service Upgrade
$1,800 – $4,500Electrical Panel Replacement
$1,300 – $4,000GFCI & AFCI Protection
$150 – $500Ceiling Fan Installation
$150 – $600Solar & Battery Storage Wiring
$1,500 – $12,000Hot Tub & Spa Wiring
$400 – $2,000Whole-House Rewiring
$8,000 – $30,000Electrical Safety Inspection
$250 – $900What moves the price in Seattle
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 98113
- King County is the permitting jurisdiction for electrical work at this location.
- Time zone: Pacific — emergency and after-hours availability follows local time.
- 59 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Seattle service area
Amber marker: Seattle, WA 98113. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 98113
Which county handles electrical permits for 98113?
This ZIP sits in King County, Washington. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
What does an electrician charge in Seattle, WA?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Washington move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Do you have electricians covering the 98113 ZIP code?
Yes — 98113 (Seattle, Washington, King County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Seattle area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
How do I know the electrician is licensed?
Ask for the licence number before work begins and confirm it with the licensing authority for your state or municipality. Electrical licensing is handled at state level in most of the country and at city or county level in a few large metro areas, so the correct place to verify depends on where you live. A licensed contractor will give you the number, and usually the insurance certificate too, without being asked twice.
How much does an electrician cost per hour?
Licensed residential electricians generally charge in the $50 to $150 per hour range in 2026, plus a service call fee of roughly $75 to $200. Most companies now price common jobs flat-rate rather than hourly, which means the number you are quoted is the number you pay if the scope does not change.
Is 24/7 emergency service available for 98113?
Emergency requests are taken around the clock. Pacific time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Other ZIP codes in Seattle, WA
59 covered ZIP codes in Seattle. Jump straight to the one closest to your address.
Need an electrician in Seattle 98113?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Seattle homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.