Seattle Electrician — 98170
The 98170 ZIP code covers part of Seattle in King County. That matters for electrical work, because permits and inspections for panel changes, new circuits and service upgrades are issued locally rather than nationally.
Permits for most electrical work in Washington are issued by a city or county building department, so the same job two towns over can involve a different fee and inspection timeline.
Free referral service · no charge for the call · written quote before any work starts
- Local crews who know your area’s permit office, inspection timelines and housing stock.
- Repairs tested under load before sign-off, not just switched on and left.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Free phone triage: describe the symptom and find out whether it is urgent or can wait.
- Insurance and workers’ compensation verified before anyone arrives at your property.
Electrical work local to 98170
Seattle is served by licensed electricians working across 59 ZIP codes. The city page for Seattle lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Seattle call about
- Scorch marks, discoloured faceplates or a warm wall plate
- Two-prong outlets or three-prong outlets with no ground
- A lightning storm or utility event has already killed devices
- Every repair uncovers a new problem because the wire itself is the problem
- Failed inspection or code corrections from a municipal notice
- An outdoor or damp-rated location needing the right fixture
- A fuse box instead of breakers, or a 60-amp or 100-amp service
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Dedicated Circuit Installation in Seattle — what it costs
Home-run circuits for appliances and equipment that should never share a circuit — freezers, microwaves, dishwashers, dryers, AC units, welders and server racks.
| Work | Typical range | Notes |
|---|---|---|
| 20 amp dedicated circuit, short run | $200 – $450 | Microwave, freezer, dishwasher |
| 20 amp dedicated circuit, long or finished-wall run | $350 – $700 | Fishing and patching add time |
| 30 amp circuit (dryer, small AC, shop tool) | $300 – $750 | Includes 10-gauge conductors |
| 50 amp circuit (range, welder, RV outlet) | $400 – $900 | Includes heavy cable and breaker |
| GFCI breaker upgrade on a new circuit | $60 – $200 | Required in wet locations |
Duration: typically 3-6 hours. Full Dedicated Circuits guide for Washington.
Services available in 98170
24/7 Emergency Electrician
$150 – $850Recessed & LED Lighting Installation
$150 – $900Solar & Battery Storage Wiring
$1,500 – $12,000Circuit Breaker Replacement & Repair
$150 – $600Hot Tub & Spa Wiring
$400 – $2,000Whole-House Generator Installation
$4,000 – $18,000Electrical Panel Replacement
$1,300 – $4,000Ceiling Fan Installation
$150 – $600Electrical Safety Inspection
$250 – $900What moves the price in Seattle
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 98170
- Located in King — the authority that issues electrical permits for this address.
- Time zone: Pacific — emergency and after-hours availability follows local time.
- 59 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Seattle service area
Amber marker: Seattle, WA 98170. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 98170
What warranty should I expect?
Workmanship warranties are set by the contractor, and one to two years on labour is common on larger jobs, with manufacturers covering the equipment separately. Ask for the warranty terms in writing on the invoice, not verbally.
Do you handle both homes and small businesses?
Most local electrical contractors take residential work and light commercial work such as retail, restaurant and office premises, including three-phase distribution, lighting retrofits and dedicated equipment circuits. Larger commercial projects are quoted from a site survey.
Is 24/7 emergency service available for 98170?
Emergency requests are taken around the clock. Pacific time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
What does an electrician charge in Seattle, WA?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Washington move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Do you have electricians covering the 98170 ZIP code?
Yes — 98170 (Seattle, Washington, King County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Seattle area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Which county handles electrical permits for 98170?
This ZIP sits in King County, Washington. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
Other ZIP codes in Seattle, WA
59 covered ZIP codes in Seattle. Jump straight to the one closest to your address.
Need an electrician in Seattle 98170?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Seattle homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.