Seattle Electrician — 98144
Looking for electrical work in the 98144 area of Seattle, Washington? Licensed electricians covering this ZIP handle repair, replacement and installation work to the code edition King County has adopted — and the quote should be in writing before anyone starts.
Ask for a flat price per task rather than an hourly estimate. Flat-rate pricing is the residential standard, and it puts the risk of a slow job on the contractor rather than on your invoice.
Free referral service · no charge for the call · written quote before any work starts
- Repairs tested under load before sign-off, not just switched on and left.
- Permits pulled where the job requires one, so the work is inspected and documented for resale.
- Insurance and workers’ compensation verified before anyone arrives at your property.
- Written quotes before work starts, with a flat price per task rather than an open hourly meter.
- 24/7 availability for genuine emergencies — burning smells, sparks, water damage and total power loss.
Electrical work local to 98144
Seattle is served by licensed electricians working across 59 ZIP codes. The city page for Seattle lists every covered ZIP, and each service page explains what the job involves and what drives the price.
What people in Seattle call about
- A burning or fishy smell near an outlet, switch or panel
- Adding a fan to a bedroom, porch or vaulted ceiling room
- Scorch marks, discoloured faceplates or a warm wall plate
- The panel has an empty 240-volt slot, or you are not sure it does
- Repeated trips that began after adding a new appliance
- Old incandescent cans that run hot and burn through bulbs
- Sparks when you plug something in, or a breaker that will not reset
If any of those are happening now, treat the circuit as suspect: switch it off at the panel and have it tested rather than resetting a breaker repeatedly.
Smoke & CO Detector Installation in Seattle — what it costs
Interconnected smoke and carbon monoxide alarms, hardwired with battery backup, positioned where code requires them and tested after installation.
| Work | Typical range | Notes |
|---|---|---|
| Battery-powered alarm, installed per device | $100 – $200 | Simplest upgrade |
| Hardwired interconnected alarm (per device) | $150 – $350 | Includes wiring to the loop |
| Combination smoke and CO alarm | $175 – $400 | Recommended near fuel appliances |
| Whole-home interconnected system (5-8 alarms) | $500 – $1,500 | Depends on access and wiring |
| Replace expired 10-year sealed alarms | $110 – $250 | Per device, includes disposal |
Duration: typically 1-3 hours. Full Smoke & CO Alarms guide for Washington.
Services available in 98144
Electrical Repair & Troubleshooting
$145 – $650200 Amp Service Upgrade
$1,800 – $4,500GFCI & AFCI Protection
$150 – $500Ceiling Fan Installation
$150 – $600Whole-House Generator Installation
$4,000 – $18,000Electrical Safety Inspection
$250 – $900Outlet, Switch & Receptacle Installation
$120 – $500Aluminum Wiring Repair
$300 – $9,000Dedicated Circuit Installation
$200 – $900What moves the price in Seattle
Things that lower it
- An existing circuit that can carry the new load
- Open access — attic, basement or crawlspace runs
- Bundling several small jobs into one visit
- Spare breaker positions already in the panel
Things that raise it
- Fishing new cable through finished plaster or drywall
- A panel that is full, undersized or a recalled brand
- Permitted work with inspection and utility coordination
- Damaged service entrance, meter base or mast
Local notes for 98144
- County: King. Permit and inspection for most electrical work in this area is issued locally.
- Time zone: Pacific — emergency and after-hours availability follows local time.
- 59 ZIP codes inside this service area.
- Service radius is local: the crew dispatched is working in this area, not travelling from out of state.
Map of the Seattle service area
Amber marker: Seattle, WA 98144. Blue markers: nearby covered cities. The shaded ring shows a typical 15-mile local service radius — actual dispatch areas vary by contractor.
Nearby ZIP codes
Adjacent ZIP codes with licensed coverage. If your address sits on a boundary, either ZIP works.
Electrician FAQ for 98144
How much does an electrician cost per hour?
Licensed residential electricians generally charge in the $50 to $150 per hour range in 2026, plus a service call fee of roughly $75 to $200. Most companies now price common jobs flat-rate rather than hourly, which means the number you are quoted is the number you pay if the scope does not change.
Is a permit needed for electrical work?
Permits are commonly required for panel replacements, service upgrades, new circuits, and work in wet locations like kitchens, bathrooms and outdoors. Simple device replacements often do not need one. Because requirements are set locally, the safest approach is to ask the contractor who will pull the permit and confirm the inspection record afterwards.
Do you have electricians covering the 98144 ZIP code?
Yes — 98144 (Seattle, Washington, King County) is inside the coverage network, and requests from this ZIP are routed to licensed electrical contractors working the Seattle area. Give the dispatcher the ZIP and the street so they can confirm the visit window.
Do you handle both homes and small businesses?
Most local electrical contractors take residential work and light commercial work such as retail, restaurant and office premises, including three-phase distribution, lighting retrofits and dedicated equipment circuits. Larger commercial projects are quoted from a site survey.
Is 24/7 emergency service available for 98144?
Emergency requests are taken around the clock. Pacific time applies locally, and after-hours availability depends on the contractor on duty — genuine emergencies such as burning smells, smoke, sparks or water contacting live wiring are prioritised over routine work.
What does an electrician charge in Seattle, WA?
Expect the same structure as the national market: roughly $50-$150 per hour for licensed residential work plus a trip fee of about $75-$200, with most common jobs priced flat-rate per task. Local labour rates in Washington move the national ranges by roughly 10-25% either way, and panel capacity work starts around $1,300 and rises from there.
Which county handles electrical permits for 98144?
This ZIP sits in King County, Washington. Permit and inspection requirements for panel changes, service upgrades and new circuits are set locally, so confirm with the contractor whether a permit is required for your specific job and who is filing it.
Other ZIP codes in Seattle, WA
59 covered ZIP codes in Seattle. Jump straight to the one closest to your address.
Need an electrician in Seattle 98144?
Free phone triage: describe what is happening and find out whether it needs a visit today or can be scheduled. No obligation, no charge for the call.
Call (619) 877-0478Call (619) 877-0478 any time. Ask for the licence number, the trip fee and a flat price for the job.
Nationwide Electrician is a free referral service connecting Seattle homeowners with licensed electrical contractors. We do not perform electrical work and we do not set the prices contractors charge. Coverage data for 18,671 US ZIP codes, last verified September 23, 2026.